[ 0.000000] Linux version 3.18.29 (tarasov@mips24) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49363) ) #3283 Wed Nov 16 12:31:21 +04 2022
[ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is ICBCOM PUMA R2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802e5a30, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=null
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=0006be10
[ 0.000000] Readback ErrCtl register=0006be10
[ 0.000000] Memory: 29016K/32768K available (2472K kernel code, 115K rwdata, 464K rodata, 140K init, 181K bss, 3752K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 360MHz
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.060000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] devtmpfs: initialized
[ 0.090000] pinctrl core: initialized pinctrl subsystem
[ 0.100000] NET: Registered protocol family 16
[ 0.100000] i2c-core: driver [dummy] registered
[ 0.110000] rt2880-pinmux pinctrl: try to register 28 pins ...
[ 0.110000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[ 0.110000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[ 0.110000] pinctrl core: add 4 pinmux maps
[ 0.110000] rt2880-pinmux pinctrl: found group selector 4 for jtag
[ 0.110000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1
[ 0.110000] rt2880-pinmux pinctrl: found group selector 0 for i2c
[ 0.110000] rt2880-pinmux pinctrl: found group selector 2 for uartf
[ 0.110000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[ 0.110000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[ 0.120000] rt2880_gpio 10000600.gpio: registering 22 gpios
[ 0.130000] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[ 0.130000] usbcore: registered new interface driver usbfs
[ 0.140000] usbcore: registered new interface driver hub
[ 0.140000] usbcore: registered new device driver usb
[ 0.150000] nfc: nfc_init: NFC Core ver 0.1
[ 0.150000] NET: Registered protocol family 39
[ 0.160000] Switched to clocksource systick
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.180000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.190000] TCP: reno registered
[ 0.190000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.200000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.210000] NET: Registered protocol family 1
[ 0.210000] rt-timer 10000100.timer: maximum frequency is 7324Hz
[ 0.220000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[ 0.220000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.260000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.260000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.270000] msgmni has been set to 56
[ 0.330000] io scheduler noop registered
[ 0.330000] io scheduler deadline registered (default)
[ 0.340000] ralink-usb-phy usbphy: invalid resource
[ 0.340000] rt2880-pinmux pinctrl: request pin 0 (io0) for pio:0
[ 0.340000] rt2880-pinmux pinctrl: request pin 2 (io2) for pio:2
[ 0.340000] gpio-export gpio_export: 2 gpio(s) exported
[ 0.350000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.360000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[ 0.360000] pinctrl core: add 1 pinmux maps
[ 0.360000] rt2880-pinmux pinctrl: found group selector 2 for uartf
[ 0.360000] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000500.uart
[ 0.360000] rt2880-pinmux pinctrl: pin io7 already requested by pinctrl; cannot claim for 10000500.uart
[ 0.370000] rt2880-pinmux pinctrl: pin-7 (10000500.uart) status -22
[ 0.370000] rt2880-pinmux pinctrl: could not request pin 7 (io7) from group uartf on device rt2880-pinmux
[ 0.380000] of_serial 10000500.uart: Error applying setting, reverse things back
[ 0.390000] 10000500.uart: ttyS0 at MMIO 0x10000500 (irq = 13, base_baud = 2500000) is a 16550A
[ 0.400000] pinctrl core: add 1 pinmux maps
[ 0.400000] rt2880-pinmux pinctrl: found group selector 3 for uartlite
[ 0.400000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
[ 0.400000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
[ 0.400000] 10000c00.uartlite: ttyS1 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[ 0.420000] pinctrl core: add 1 pinmux maps
[ 0.420000] pinctrl core: add 1 pinmux maps
[ 0.420000] rt2880-pinmux pinctrl: found group selector 1 for spi
[ 0.420000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1
[ 0.420000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
[ 0.420000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
[ 0.420000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
[ 0.420000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
[ 0.420000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10000b00.spi
[ 0.420000] rt2880-pinmux pinctrl: pin io27 already requested by pinctrl; cannot claim for 10000b00.spi
[ 0.430000] rt2880-pinmux pinctrl: pin-27 (10000b00.spi) status -22
[ 0.430000] rt2880-pinmux pinctrl: could not request pin 27 (io27) from group spi_cs1 on device rt2880-pinmux
[ 0.440000] spi-rt2880 10000b00.spi: Error applying setting, reverse things back
[ 0.460000] m25p80 spi32766.0: found s25fl064k, expected gd25q64
[ 0.460000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[ 0.470000] 4 ofpart partitions found on MTD device spi32766.0
[ 0.470000] Creating 4 MTD partitions on "spi32766.0":
[ 0.480000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.490000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.500000] 0x000000040000-0x000000050000 : "factory"
[ 0.500000] 0x000000050000-0x000000800000 : "firmware"
[ 0.580000] 2 uimage-fw partitions found on MTD device firmware
[ 0.590000] 0x000000050000-0x00000015f3d7 : "kernel"
[ 0.590000] 0x00000015f3d7-0x000000800000 : "rootfs"
[ 0.600000] mtd: device 5 (rootfs) set to be root filesystem
[ 0.610000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.610000] 0x0000002d0000-0x000000800000 : "rootfs_data"
[ 0.620000] tun: Universal TUN/TAP device driver, 1.6
[ 0.630000] tun: (C) 1999-2004 Max Krasnyansky
[ 0.640000] ralink_soc_eth 10100000.ethernet: generated random MAC address 82:fc:e6:69:96:4d
[ 0.650000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[ 0.660000] PPP generic driver version 2.4.2
[ 0.660000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.670000] ehci-platform: EHCI generic platform driver
[ 0.680000] phy phy-usbphy.0: remote usb device wakeup disabled
[ 0.690000] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 0.700000] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 0.700000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 0.710000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 0.730000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 0.730000] usb usb1: no of_node; not parsing pinctrl DT
[ 0.730000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[ 0.730000] hub 1-0:1.0: USB hub found
[ 0.740000] hub 1-0:1.0: 1 port detected
[ 0.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.750000] ohci-platform: OHCI generic platform driver
[ 0.750000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 0.760000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 0.770000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 0.830000] usb usb2: no of_node; not parsing pinctrl DT
[ 0.830000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[ 0.830000] hub 2-0:1.0: USB hub found
[ 0.830000] hub 2-0:1.0: 1 port detected
[ 0.840000] usbcore: registered new interface driver usbserial
[ 0.850000] usbcore: registered new interface driver option
[ 0.850000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.860000] usbcore: registered new interface driver qcserial
[ 0.870000] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.870000] usbcore: registered new interface driver sprd_u2s
[ 0.880000] usbserial: USB Serial support registered for sprd_generic_u2s_interface
[ 0.890000] usbserial: USB Serial support registered for sprd_u2s
[ 0.890000] i2c-core: driver [rtc-ds3232] registered
[ 0.890000] i2c /dev entries driver
[ 0.900000] rt2880_wdt 10000120.watchdog: Initialized
[ 0.900000] TCP: cubic registered
[ 0.910000] NET: Registered protocol family 17
[ 0.910000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.930000] bootconsole [early0] disabled
[ 0.930000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.930000] Warning: unable to open an initial console.
[ 0.960000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 0.980000] devtmpfs: mounted
[ 0.980000] Freeing unused kernel memory: 140K (802fd000 - 80320000)
[ 4.550000] jffs2: notice: (290) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 6.050000] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14
[ 6.400000] Driver for 1-wire Dallas network protocol.
[ 6.430000] Custom GPIO-based W1 driver version 0.1.1
[ 6.430000] w1-gpio w1-gpio.0: no of_node; not parsing pinctrl DT
[ 6.430000] rt2880-pinmux pinctrl: request pin 1 (io1) for pio:1
[ 6.610000] random: dd urandom read with 10 bits of entropy available
[ 18.780000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 18.930000] usb 1-1: no of_node; not parsing pinctrl DT
[ 18.930000] sprd_u2s 1-1:1.0: no of_node; not parsing pinctrl DT
[ 18.930000] sprd_u2s 1-1:1.0: sprd_u2s converter detected
[ 18.930000] sprd_u2s ttyUSB0: no of_node; not parsing pinctrl DT
[ 18.930000] usb 1-1: sprd_u2s converter now attached to ttyUSB0
[ 18.930000] sprd_u2s 1-1:1.1: no of_node; not parsing pinctrl DT
[ 18.930000] sprd_u2s 1-1:1.1: sprd_u2s converter detected
[ 18.930000] sprd_u2s ttyUSB1: no of_node; not parsing pinctrl DT
[ 18.930000] usb 1-1: sprd_u2s converter now attached to ttyUSB1
[ 18.930000] sprd_u2s 1-1:1.2: no of_node; not parsing pinctrl DT
[ 18.930000] sprd_u2s 1-1:1.2: sprd_u2s converter detected
[ 18.930000] sprd_u2s ttyUSB2: no of_node; not parsing pinctrl DT
[ 18.930000] usb 1-1: sprd_u2s converter now attached to ttyUSB2
[ 67.010000] random: nonblocking pool is initialized
|
